English
Español
FrançaisSolutions
The Ventilated FacadeProducts
Project
Rake Trim
Description
Rake trim is the top closure of two vertical faces or between a vertical face and other elements such as roofings or drains. It is available in galvanized sheet as well as the different ranges of pre-lacquered colours.
RCO.01
Trim of closure between lateral upward slope of a roof and vertical face. It is available in galvanized sheet as well as in the different ranges of pre-lacquered colours.
RCO.02
Trim of upper closure between two vertical faces or between vertical face and gutter. It is available in galvanized sheet as well as in the different ranges of pre-lacquered colours.
RCO.03
Trim of upper closure between two vertical faces or between vertical face and gutter. It is available in galvanized sheet as well as in the different ranges of pre-lacquered colours.
RCO.04
Trim of closure between lateral upward slope of a roof and vertical face. It is available in galvanized sheet as well as in the different ranges of pre-lacquered colours.
RCO.05
Trim of upper closure between two vertical faces or between vertical face and gutter. It is available in galvanized sheet as well as in the different ranges of pre-lacquered colours.
RCO.06
Trim of upper closure between two vertical faces or between vertical face and gutter. It is available in galvanized sheet as well as in the different ranges of pre-lacquered colours.
RCO.07
Trim of closure between lateral upward slope of a roof and vertical face. It is available in galvanized sheet as well as in the different ranges of pre-lacquered colours.
RCO.08
Trim of upper closure between two vertical faces or between vertical face and gutter. It is available in galvanized sheet as well as in the different ranges of pre-lacquered colours.
RCO.09
Trim of upper closure between two vertical faces or between vertical face and gutter. It is available in galvanized sheet as well as in the different ranges of pre-lacquered colours.
|
Sunday, 20 May 2012, 16:40
You will need...
Use for...
Elija entre...
Programa de cálculo
de forjado colaborante
Predimensiona tu forjado colaborante con esta sencilla aplicación.
Remates,
plano situacional
Descubre como resolver los encuentros más comunes mediante nuestros remates.
Ingenieria y Construcción del Perfil S.A
Carrer Nou, nº 16-27 · Pol. Industrial Mas del Polio
46469 Beniparrell (Valencia)
Tel: 96 121 17 78 · Fax: 96 121 15 04
|
0,124 seg / 96 sql / 28,13 MB |